NCL CCGI Meterials

PREPAINTED STEEL

Cold rolled steel coil made up of base steel as per IS 513 grade ā€œDā€ quality, galvanized as per is 277 with zinc coating of 120 grams/sq.mtr. it should be with primer coat of epoxy primer of 5-7 microns thick, finish painted with polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns.

High in UV Resistance

  • IS 513 CRCA steel
  • 120 GSM Zinc as per IS 277
  • 10-14 Microns of Base coat plus 10-14 Microns of wood texture coat
  • 5 -7 Microns of Alkyd backer
  • Polyethylene filmr

  • IErichsen Cupping Test : 6.0 mm
  • Bend Test : 3T Pass
  • Impact Test : 60 Inch-pound Pass
  • Cross Hatch Test : Pass
  • QAV Resistance Test : 750 Hrs
  • Solvent Resistance (MEK) Test : Pass
  • Humidity Test : 500 Hrs Pass
  • Solvent Resistance (MEK) Test : Pass
  • Salt Spray Test : 500 Hrs Pass

Quality Assurance

Cold rolled steel coil made up of base steel as per IS 513 grade ā€œDā€ qualityl, galvanized as per is 277 with zinc coating of 120 grams/sq.mtr. The roll formed section should be powder coated with pure polyester powder up to 50-60 microns thick.

Hardware

Doors & windows of seccolor range are assembled with high quality hardware made of either with high grade aluminum, crca electroplated or glass filled nylon. Gasket is made up of ethyl propylene diamine monomer (EPDM). All the hardware is made by exclusive suppliers and 100% quality assured.

NCL Meterials